BFQGZ - SCOTCH 1300L ADHESIVE
- MSDS: BFQGZ
- Manufacturer: 3M CO AC AND S DIV
- Product Name: SCOTCH 1300L ADHESIVE
- National Stock Number: 8040-00-809-8252
Product Identification
Product ID:SCOTCH 1300L ADHESIVE
MSDS Date:01/01/1987
FSC:8040
NIIN:00-809-8252
MSDS Number: BFQGZ
Responsible Party
ST. PAUL, MN 55144-1000
US
Emergency Phone: 612-733-1341
Info Phone: 612-733-1341
Cage: 04963
Contractor
Telephone: 866-556 5712 / 612-733-1110
Cage: 76381
Ingredients
PETROLEUM DISTILLATES (NAPHTHA OR RUBBER SOLVENT)
CAS: 8002-05-9
RTECS: SE7449000
Fraction By Weight: 42.0%
OSHA PEL 400 PPM
ACGIH TLV: 400 PPM; 8990
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 23%
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 5.0%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
PHENILIC COMPOUND(RESIN)
B-CHLOROPRENE (SARA III)
CAS: 126-99-8
RTECS: EI9625000
OSHA PEL S; 25 PPM
ACGIH TLV: S; 10 PPM; 9293
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
Effects of Overexposure:EYE-IRRIT.SKN-MAY DEFAT AFTER REPEAT
CONT.INHAL-RESP.SYS.IRRIT.IF INGEST&ASPIR INTO LUNGS-CHEM PNEUM
First Aid
First Aid:EYES:FLUSH W/WATER FOR 10 MIN,CALL MD.SKIN:WASH
W/SOAP&WATER.INHAL:PROVIDE FRESH AIR.INGEST:DO NOT INDUCE
VOMITING!CALL MD.
Fire Fighting
Flash Point:-14 F CC
Lower Limits:1.0
Upper Limits:11.5
Extinguishing Media:CO*2,FOAM,DRY CHEM
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:EXTINGUISH ALL IGNITION SOURCES. COLLECT
SPILLED MATL. CLEAN UP RESIDUE & STORE IN CLOSED METAL CNTNR.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS, FLAMES.
KEEP CNTNRS CLOSED. VAPORS GIVEN OFF ARE EASILY IGNITED. USE ONLY
IN AREAS ADEQUATELY VENT, NO VAPOR BUILDUP.
Other Precautions:AVOID EYE CNTCT. AVOID PROLONGED BRTHNG OF VAPORS &
PROLONGED/REPEATED SKIN CNTCT. KEEP OUT OF REACH OF CHILDREN.
PREVENT VAPOR BUILDUP, USE ONLY IN AREAS W/ADEQUATE VENT.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPRVD IF VENT NOT ADEQUATE TO
REMOVE VAPORS
Ventilation:LOCAL EXHST
Protective Gloves:NEOPRENE
Eye Protection:CHEM GOGGLES
Supplemental Safety and Health
CHLOROPRENE POLYMER,PHENOLIC RESIN,MAGNESIUM OXIDE,SODIUM ACETATE AND
ZINC OXIDE ARE APPROXIMATELY 30% OF PRODUCT.
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:140 F
Vapor Pres:120
Vapor Density:3
Spec Gravity:0.88
Evaporation Rate & Reference:>2.5 ETHER
Solubility in Water:SLIGHT
Appearance and Odor:YELLOW LOW VISCOSITY LIQUID,SOLVENT ODOR
Percent Volatiles by Volume:70.0
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO, CO*2, CHLORINATED DECOMP PROD
Disposal
Waste Disposal Methods:SEND TO NEAREST HAZ WASTE MANAGEMENT FACILITY
FOR INCINERATION. DO NOT LANDFILL. BASED ON FLASH POINT CRITERIA,
IGNITABILITY, DISCARDED & OFF-SPEC PROD WOULD HAVE EPA HAZ WASTE NO
OF D-001 AS DEFINED IN 40CFR, PART 261.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.